50
14. Distance from front of firewall to front of
engine prop hub is
7 7/8”
.
Note:
Use aluminum spacers (supplied) and washers
(not supplied) to achieve correct distance.
Throttle Servo and Choke Installation
1.
Gather the left and right plywood throttle and
choke servo mounting trays, the throttle and
choke servos, servo arms and pushrod parts as
shown below.
◊
2 - 4-40 metal rods threaded at one end
◊
4 - 4-40 ball links and hardware
◊
4 - Brass spacers
◊
2 - 4-40 threaded solder couplers
2. Use a 1/4” bit to drill a pushrod exit hole in the
firewall in line with the engine carburetor throt-
tle arm.
3. Assemble ball link to threaded end of pushrod.
Note:
Thread ball link half way onto pushrod to
allow for proper adjustment during final
installation.
