9
Hardware
:
ITEMS NEEDED TO COMPLETE
•
1.60-1.80 Glow– 30cc Gas engine and ignition
•
Standard or Pitts style muffler
(Pitts Recommended)
•
2 x aileron servos (min 140 in./oz. Torque @ 6
volt, Digital, Metal Geared)
•
2 x flap servos (min 140 in./oz. Torque @ 6 volt,
Digital, Metal Geared)
•
1 x rudder servo (min 180 in./oz. Torque @ 6
volt, Digital, Metal Geared)
•
1 x elevator servos (min 180 in./oz. Torque @ 6
volt, Digital, Metal Geared)
•
1 x throttle servo (Fast / Reliable)
•
Servo extensions 2 x 6”, 4 x 18,” 2 x 24”
•
1 x 8 channel receiver (2.4Ghz recommended)
•
1 x receiver battery (min 6.0 volt / 1700ma)
•
1 x ignition battery (min 4.8 volt / 1700ma)
(Gas Only)
•
2 x switches with charge jacks /Rec., Ing
•
1 x Light Battery (4.8 Volt/ 1700ma)
•
1x Switch with charge jack/ Nav Lights
Tools
:
•
Allen wrenches US and Metric.
•
Dremel cutting disc and sanding drum tool
•
Electric drill and selection of bits
•
Razor saw
•
Flat head screwdriver
•
Hobby heat gun
•
Hobby iron and covering sock
•
Masking tape
•
Modeling knife
•
Needle nose pliers or crimping tool
•
Paper towels
•
Pen, pencil or felt tipped marker
•
Phillips screwdriver
•
Rubbing alcohol
•
Ruler and tape measure
•
Scissors
•
T pins
•
Waxed paper
•
Wire Cutters
Adhesives
:
•
15-30 Minute epoxy
•
Blue Loctite
•
Epoxy mixing cups, mixing sticks, brushes
•
CA kicker (optional)
•
Thick, Thin and Medium CA
•
Rubbing alcohol
•
Wipes
WARNING
Some rubbing alcohols
may attack painted parts.
