17
15. Draw the servo extension through the wing and
pull through the wing root rib.
16. Taping servo lead to the inside of the wing panel
will help to prevent leads from dropping back
inside of wing panel during transportation.
17. Gather the aileron and flap control linkage parts
as shown below. (1) 3” pushrod
aileron
, (1) 2.5”
Pushrod
flap
(4) 4-40 ball link assemblies, (2)
brass spacers, (4) flat washer, (2)control horns,
and (8) wood screws for each wing panel.
14. Fasten the pull string from the servo hole to the
male plug of the servo extension.
