4
INTRODUCTION
Your new 30cc LC-126ARF-QB is a scale airplane. The aircraft builds easily, quickly, and
precisely due to its state of the art CAD design, LASER cut technology, and high quality in-
cluded hardware. We hope you enjoy building and flying your 30cc LC-126ARF-QB.
Great care has been taken in both the design and manufacturing of the 30cc LC-126ARF-QB
to allow for the strongest and lightest construction possible. Only the highest quality materi-
als from the covering, paint, wood and hardware have been used in the construction of this
model.
The 30cc LC-126ARF-QB has been individually hand built, covered and painted by trained
and experienced craftsmen with over 25 years of manufacturing experience. Using CAD de-
sign, laser cut technology and jig-built assures accuracy in all stages of production.
The 30cc LC-126ARF-QB is designed for glow and gas engines in the 1.60 glow and 30cc
gas category. The OS 1.60 Satio 1.80 and DLE 30cc engine are shown in the assembly in-
structions. The aircraft was tested with the Satio 1.80 and has outstanding performance. The
final choice of engine is left up to the builder. A computer radio is recommended to allow
the pilot to take advantage of the full capabilities of this aircraft.
IMPORTANT
Please read through this manual carefully, before starting the assembly of
your new 30cc LC-126 ARF-QB . Inventory and inspect all parts and hardware for any im-
perfections or damage. Notify
Aeroworks immediately
if there are missing or damaged
parts.
INTENDED USE
This plane should not be regarded as a toy. This is an intermediate to advanced skill level model and
is recommended for pilots who are beyond the trainer-stage.
!READ!
WARRANTY
!READ!
It is important to notify Aeroworks of any damage or problems with the model within 30
days of receiving your airplane to be covered under warranty. All returned parts must be
shipped in their original shipping boxes and insured for full replacement value. If you wish to
return this aircraft for any reason a 15% restock fee will be charged to the customer. In addi-
tion the customer is responsible for all return shipping cost and all prior shipping cost will
not be refunded. Parts will be fixed or replaced once the original item is returned at the
owner’s expense. It is the decision of Aeroworks if the item is to be replaced or repaired.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore, will not be accountable for any property
damage, bodily injury or death caused by this aircraft.
Aeroworks cannot insure the skill of the modeler and can not influence the builder during the
construction or use of this aircraft, and therefore,
The purchaser/operator accepts all responsibility of any and all structural or
mechanical failures.
