55
10. Locate the engine standoffs, mounting bolts,
lock nuts, and washers. Slide the bolts through
the engine and install standoffs as shown. Slide
the engine mounting bolts through the pre
drilled holes in the engine mount.
11. Install washers and lock nuts on the back side of
the engine mount and tighten engine mounting
bolts as shown.
Note:
Do not over tighten engine mounting bolts,
this can cause the wood to compress and will
weaken the engine mounting box.
12. Distance from front of firewall to front of
engine prop hub is
6 3/4”
.
9. Finished engine mount installation shown below.
