16
9. Use a C-Clamp to hold the servo against the
hatch until the epoxy fully cures. Use a piece of
balsa or foam on the bottom of the C-Clamp to
avoid crushing the servo mounting hatch.
10. For added strength install provided wood screws
into the servo mounting blocks as shown below.
This will ensure that the block will be unable to
come loose.
11. Repeat steps for the 3 remaining servos.
13. Layout the servos as shown below. Install the
extensions at this time and double check exten-
sion length.
12. Attach the 6” and 18” extension to the servo
lead and secure with Aeroworks Safety Clip.
Ensure the connectors will not come apart from
vibration or light tension.
Safety Clips
Available
from
Aeroworks
