74
17. If a regulator is used install it at this time. Refer
to the regulator manufacturers instructions for
specific regulator mounting.
18. Install the receiver using foam pad and Velcro
one wrap strap. Refer to receiver manufacturers
instructions for specific antenna orientation.
Lighting Kit Installation
1. Gather the following items for the optional light-
ing system. Wiring harness (supplied), switch,
4.8V battery, (2) 18” extensions, (2) 24” exten-
sions, switch mount, Velcro strap, zip ties, foam
padding, (6) Aeroworks Safety Clips as shown
below.
2. Both the included (top) as well as the optional
remote (bottom) wiring harnesses are shown
below. The remote harness will enable the pilot
to turn the lights on and off via the transmitter.
This harness is available from Aeroworks sepa-
rately.
