84
9. Trace around the template as shown below. It
may be necessary to increase the size of the cut-
out to aid in cowl installation.
10. Align template with bottom of cowl. Use a felt
tip marker to transfer the template cutout pattern
to the cowl and mark cut location.
Note:
Pay close attention to the marker you
choose. Some permanent markers may not
be easily removed. Also, When using
rubbing alcohols or other paint removers,
always test on painted parts before using!
11. Mark the location of the inner cowl ring as
shown. This portion of the cowl ring will be re-
moved. The removal of the cowl ring will not
weaken the cowl or its mounting areas.
12. Cut a strip of the template long enough to reach
the glow plug on the engine. Tape this strip to
the side of the fuse and mark the location of the
plug (if not using a remote glow plug). Also use
this method to locate the needle valve adjust-
ment screw.
