52” Aeroworks Extra 260 Freestyle Assembly Manual
17
11. A drop of thin CA may be applied to the swage
tube to help secure the cable.
12. Repeat for other side rudder control linkage.
13. Attach ball links to the servo arm as shown be-
low.
14. Plug the rudder servo into the rudder channel of
the receiver and power up. Turn on transmitter
to center rudder servo.
15. Pull cable snug and attach pull-pull cable to rear
ball links, using the same methods shown in
steps 6-12.
9. Crimp the brass tube with a crimping tool or pli-
ers.
10. Cut off excess cable as shown.
