52” Aeroworks Extra 260 Freestyle Assembly Manual
19
8. Insert axle bolt into landing gear strut and secure
with a 6-32 lock nut. Ensure that the wheel turns
freely and does not bind.
9. Install the wheel pant using a 4-40 mounting
bolt, lock washer and flat washer. Use blue loc-
tite on mounting bolt to ensure it does not come
loose from vibration.
Note:
Blind nut has been preinstalled in wheel pant.
10. Repeat above steps for other wheel and wheel
pant.
6. Slide 1mm nylon spacer onto axle bolt as shown.
7. Thread 6-32 lock nut onto the axle bolt until it is
1mm away from the wheel.
Note
: Do not over-tighten nut so wheel spins freely.
