24
52” Aeroworks Extra 260 Freestyle Assembly Manual
9. Finished cowling/spinner installation shown be-
low. The air inlet hole has been pre cut and will
align with the air scoop installed in the previous
steps.
1. Using a small piece of hook and loop material,
attach the receiver to the receiver mounting tray
as shown.
2. Final receiver mounting position shown below.
Secure any antennas at this time.
7. Install spinner back plate and prop to the motor
adapter as shown. Follow the motor manufac-
tures recommendation for tightening the prop.
8. Install spinner using the supplied Phillips
screws. Do not over tighten screws as this can
cause the mounting locations to become weak.
RADIO AND BATTERY
INSTALLATION
