52” Aeroworks Extra 260 Freestyle Assembly Manual
11
8. Mark the location of the stab at the fuse at this
time.
9. Use “T” pins to temporarily hold the stab in
place as shown.
10. Attach a “T” pin at the corner of each aileron at
the wing tip. Make sure the “T” pins are placed
in the exact corner of each aileron.
11. Using a tape measure, attach the end hook to the
“T” pin in the aileron and measure to the trailing
edge of the stab at the tip as shown. Repeat this
step for the other side of the stab. Ensure that the
measurement is identical on each side. If the stab
is not straight as compared to the wing some
adjustment may be necessary.
6. Make sure the locator dowel is fully engaged
into the locator block by sliding the stab forward
in the cutout. This will help to hold the front of
stab in place.
7. Measure the stab at the trailing edge on both
sides of the fuse as shown. Make sure the stab is
centered on the fuse.
