52” Aeroworks Extra 260 Freestyle Assembly Manual
27
5. With plane ready to fly and battery installed on
the center of the battery tray, lift airplane using
the Micro CG Buddy handle. The Extra 260
Freestyle should sit slightly nose down. Adjust
battery placement on battery tray to achieve the
proper CG.
Note:
CG is measured with the canopy off when
using the Micro CG Buddy.
1. Using a 5-64” ball driver, tighten all 4 cowl
mounting bolts.
2. Slide the wing tube in the fuse wing tube sleeve.
Slide the wings on the wing tube and plug in the
aileron servo connectors. Slide the rubber
backed washers on the wing mounting bolts and
insert bolts through the fuse side and into the
wing root blind nuts. Tighten snugly but do not
over tighten and crack the fuse or wing root
wood.
3. Slide Micro CG Buddy handle onto the string
through the pre cut slot as shown below.
4. Ensure that the string is not caught on the fuse
side or any wires.
PREFLIGHT PREPERATIONS
