28
52” Aeroworks Extra 260 Freestyle Assembly Manual
3. Slide canopy onto fuse as shown. Ensure that the
front mounting tabs and center mounting hooks
are fully engaged, do not force canopy into posi-
tion.
4. Turn the 1/4 turn canopy latch at the top of the
canopy as shown. This will secure the canopy in
place and will allow for quick battery access.
1. Gather the Rudder Throw Meter (
Supplied
) and
scotch tape.
Note:
One small and one medium throw meter have
been supplied use the small meter for the
rudder and the medium throw meter for the
ailerons and elevators.
2. Slide the throw meter under the rudder boost tab.
MEASURING CONTROL
THROWS
Low
Rate Medium
Rate
Aileron
1 1/4” or 19˚ up
1 1/2” or 25˚ up
1 1/4” or 19˚ down 1 1/2” or 25˚ down
Rudder
25˚ left
35˚left
25˚ right
35˚right
Elevator
1 1/2” or 20˚ up
2 1/8 ” or 35˚ up
1 1/2” or 20˚ down 2 1/8” or 35˚ down
For 3D flying use the following throws:
High
Rate
Aileron
2 1/4” or 35˚ up
2 1/4” or 35˚ down
Rudder
45˚left
45˚right
Full rudder deflection is typically
recommended for all out 3D
Elevator
3” or 50˚ up
3” or 50˚ down
Recommend Expediential:
25% expediential on low rates
45% expediential on medium rates
60% expediential on high rates
Use the given rates as a starting point. Then
adjust rates from there to suit your own flying
style.
CONTROL THROW
DEFLECTION TABLE
