14
52” Aeroworks Extra 260 Freestyle Assembly Manual
2. Use 80 Grit Sandpaper to scuff the carbon con-
trol horn where it will be glued to the rudder as
shown below.
3. Center the control horn in the mounting slot as
shown. Once the horn is centered wick Thin CA
into the joint as shown below.
3. Center the servo arm on the servo as shown. Ad-
just the linkage length until the ball link is
aligned with the mounting hole in the control
horn. Mount the ball link to the control horn us-
ing the supplied hardware.
RUDDER/TAIL WHEEL
ASSEMBLEY
1. Gather the items shown below for the installa-
tion of the Rudder and Tail Wheel.
Required Parts
◊
1 - Rudder
◊
1 - Tail wheel assembly
◊
3 - Phillips head screws for Tail Wheel
Mounting
◊
3 - CA Hinges
◊
1 - Carbon control horn - Double
Required Tools and Adhesives
◊
6 - Medium T Pins
◊
1oz Bottle Thin CA Glue
◊
1oz Bottle Thick CA Glue
◊
Phillips Screwdriver
◊
80 Grit Sand Paper
