52” Aeroworks Extra 260 Freestyle Assembly Manual
9
1. Gather the items shown below for the installa-
tion of both the inner and outer Side Force
Generators or SFG’s.
Required Parts
◊
1 - Outer SFG
◊
1 - Inner Top SFG
◊
1 - Inner Bottom SFG
◊
2 - 4-40 SFG Mounting Bolts
◊
2 - #6 Bonded Washers
Required Tools and Adhesives
◊
5/64” Ball Driver
◊
.34oz Bottle Blue IC-Loc Thread Locker
SFG INSTALLATION
2. If using the inner SFG the covering must be re-
moved as shown below. Use a hobby knife to cut
away the covering.
3. Slide the Inner SFG into the slot as shown. The
SFG mounting tabs may require light sanding if
they are to tight. If the mounting tabs are too
loose a thin piece of tape can be added to tighten
them in the mounting slots.
5. Using 4-40 bolts and bonded washers mount the
Outer SFG as shown.
Note:
Use a drop of blue Loctite on mounting bolts
before attaching the SFG.
6. Repeat previous steps for the remaining wing.
4. Slide the Inner SFG back in the slot until it locks
in place. The Inner SFG’s are removable so no
glue is necessary for their installation.
Outer SFG
Inner Top SFG
Inner Bottom SFG
Inner SFG
Mounting Slot
