HWS.1 Handy Wire Scanner - 240HW01V00
B2798_E 1.1, 2016-04-08
15
Follow the instructions below:
Fix the rail
on-line, in a suitable position, depending
upon the wire axis position
.
To get the rail dimensions please check the drawing
above
Insert from the bottom the pulley assembly
, using
the nuts sliding inside the rail groove
Position the pulley assembly in order to apply a slight
tension to the wire : the pulley should rotate when the
wire moves.
Now lock the assembly to the rail by fastening the
screws
.
Rotate the pre-setting wheel
to get on top the
figure which is closer to the actual wire diameter (pre-
settable values are 0.5/1.5/2.5/3.5/4.5/5.5 mm)
Insert from the top, into the rail, the gun holder
and let it touch the pre-setting wheel