AE Techron 3110 Help Files And Product Reference Download Page 62

Page: 62 / 66

Information subject to change

12-17-2018

3110 HELP FILES – SECTION 11

(18) Xavier Leroy LGPL License (i[3456]86-*-linux*

[email protected])

This program is free software; you can redistribute it

and/or modify it under the terms of the GNU Library

General Public License as published by the Free Soft-

ware Foundation; either version 2 of the License, or (at

your option) any later version.

This program is distributed in the hope that it will be

useful, but WITHOUT ANY WARRANTY; without even

the implied warranty of MERCHANTABILITY or FIT-

NESS FOR A PARTICULAR PURPOSE. See the GNU

Library General Public License for more details.

Intel hereby grants you permission to copy, modify,

and distribute this software and its documentation.

Intel grants this permission provided hat the above

copyright notice appears in all copies and that both

the copyright notice and this permission notice appear

in supporting documentation. In addition, Intel grants

this permission provided that you prominently mark

as “not part of the original” any modifications made to

this software or documentation, and that the name of

Intel Corporation not be used in advertising or pub-

licity pertaining to distribution of the software or the

documentation without specific written prior permis

sion.

Intel Corporation provides this AS IS, WITHOUT ANY

WARRANTY, EXPRESS OR IMPLIED, INCLUDING,

WITHOUT LIMITATION, ANY WARRANTY OF MER-

CHANTABILITY OR FITNESS FOR A PARTICULAR PUR-

POSE. Intel makes no guarantee or representations

regarding the use of, or the results of the use of, the

software and documentation in terms of correctness,

accuracy, reliability, currentness, or otherwise; and

you rely on the software, documentation and results

solely at your own risk.

IN NO EVENT SHALL INTEL BE LIABLE FOR ANY

LOSS OF USE, LOSS OF BUSINESS, LOSS OF PROF-

ITS, INDIRECT, INCIDENTAL, SPECIAL OR CONSE-

QUENTIAL DAMAGES OF ANY KIND. IN NO EVENT

SHALL INTEL’S TOTAL LIABILITY EXCEED THE SUM

PAID TO INTEL FOR THE PRODUCT LICENSED HERE-

UNDER.

(20) Hewlett-Packard (hppa targets only) - (c) Copy-

right 1986 HEWLETT-PACKARD COMPANY

To anyone who acknowledges that this file is provided

“AS IS” without any express or implied warranty: per-

mission to use, copy, modify, and distribute this file for

any purpose is hereby granted without fee, provided

that the above copyright notice and this notice appears

in all copies, and that the name of Hewlett-Packard

Company not be used in advertising or publicity per-

taining to distribution of the software without specific,

written prior permission.

Hewlett-Packard Company makes no representations

about the suitability of this software for any purpose.

(21) Henry Spencer (only *-linux targets) - Copyright

This software is not subject to any license of the

American Telephone and Telegraph Company or of the

Regents of the University of California.

Permission is granted to anyone to use this software

for any purpose on any computer system, and to alter

it and redistribute it, subject to the following restric-

tions:

The author is not responsible for the consequenc-

es of use of this software, no matter how awful,

even if they arise from flaws in it.

The origin of this software must not be misrep-

resented, either by explicit claim or by omission.

Since few users ever read sources, credits must

appear in the documentation.

Altered versions must be plainly marked as such,

and must not be misrepresented as being the origi-

nal software. Since few users ever read sources,

credits must appear in the documentation.

This notice may not be removed or altered.

Redistribution and use in source and binary forms,

with or without modification, are permitted provided

that the following conditions are met:

Redistributions of source code must retain the

above copyright notice, this list of conditions and

the following disclaimer.

Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and

the following disclaimer in the documentation and/

or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND

CONTRIBUTORS ``AS IS’’ AND ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIM-

ITED TO, THE IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR

OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,

INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS

OR SERVICES; LOSS OF USE, DATA, OR PROFITS;

OR BUSINESS INTERRUPTION) HOWEVER CAUSED

AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUD-

ING NEGLIGENCE OR OTHERWISE) ARISING IN ANY

WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

(23) Konstantin Chuguev (--enable-newlib-iconv) -

rights reserved.

Redistribution and use in source and binary forms,

with or without modification, are permitted provided

that the following conditions are met:

Summary of Contents for 3110



































































Search results

Summary of Contents for 3110

Reviews:

AE Techron 3110, Help Files And Product Reference, Page: 62 / 66

Search results

Summary of Contents for 3110

Reviews: