manualshive.com logo in svg

AE Techron 3110, Help Files And Product Reference, Page: 50 / 66

Share
Download
AE Techron 3110 Help Files And Product Reference Download Page 50

Information subject to change

12-17-2018

3110 HELP FILES – SECTION 9

50

9.4.3  The Segment Defaults Tab

The 

Segment Defaults

 tab contains the default 

settings for 3110 waveforms. When a new wave-
form is added into the main window, the initial 
waveform properties will be determined by these 
default settings. To change a default setting, select 
the input box for that setting, and then type the 
new setting into the text box or select the new 
value from the dropdown window. Select Save 
to save the new settings and close the Settings 
window. To return all Segment Default settings to 
the factory defaults, select the Reset to Defaults 
button. See 

Figure 9.4.

9.4.4  The System Calibration Tab

The 

System Calibration

 tab holds information 

about the output generated by the DSR system or 

the combined 3110/amplifier system. See 

Figure 

9.5.

Both system gain and system DC offset informa

-

tion are used by the 3110 to adjust its signal output 

to produce the expected signal at the amplifier out

-

put. By default, a stand-alone 3110’s system gain 

is set at 20 and the DC offset is set at 0. A DSR 

system will have a gain setting determined by the 

number of amplifiers contained in the system. 

For accurate operation, the actual gain and offset 

of your system should be tested by running the 
Calibration Test. See the 

“System Calibration” 

Figure 9.4 – TheSegment Defaults Tab in the Settings Window

Summary of Contents for 3110



































































Reviews:

No comments