Information subject to change
12-17-2018
3110 HELP FILES – SECTION 9
48
9 Settings Window
The Settings window contains five tabs that pro
-
vide information and control settings for the 3110.
NOTE:
The Network tab is not available when
working on a remote computer in Demo Mode.
9.4.1 The About Server Tab
The
About Server
tab contains the 3110 version
information for the Software and Firmware. It also
displays the current IP address for the 3110. This
information is automatically displayed and is used
for diagnostic purposes. See
Figure 9.1.
9.4.2
The Configuration Tab
The
Configuration
tab allows the control for the
loop monitor window to be toggled on and off, and
also provides the controls for GPIO setup. See
Figure 9.2.
Loop Monitoring:
The
Loop Monitoring
checkbox turns the loop
monitor window on or off. When the box is
checked, the loop monitor window will be dis-
played during test playback. For more information
about loop monitoring, see the topic “Loop Moni-
toring.”
GPIO Setup:
Please refer to the sidebar on the following page
for GPIO Setup instructions.
Figure 9.1 – The About Server Tab in the Settings Window
Figure 9.2 – The Configuration Tab in the Settings Window