Maintenance
© by DLoG GmbH
DLT-V6210 Manual V1.00
Page 51 / 61
13.2. Cleaning the DLT-V6210
WARNING
Hazardous voltage, electrical shock from contact with live parts when cleaning the
device.
To prevent an electrical shock while cleaning the device:
Switch off DLT-V6210 before cleaning.
Disconnect from the power supply.
Disconnect all connected accessories.
NOTICE: Physical damage
Cleaning the touchscreen and housing:
Never use chemical solvents to clean the touchscreen.
Do not use acidic or alkaline solutions.
Do not use cleaning agents that contain ammonia or sulfur (tile cleaners, for example,
contain ammonia).
Do not use any abrasive glass cleaner or cloths that could scratch the touchscreen.
Cleaning the housing
Ensure that DLT-V6210 is switched off and currentless.
Clean the housing with a slightly dampened cloth.
Do not use compressed air, a high-pressure cleaner or vacuum cleaner, as this can damage the
surface. Using a high-pressure cleaner poses the additional risk of water entering the device and
damaging the electronics or display.
Cleaning the touchscreen
Ensure that DLT-V6210 is switched off and currentless.
Use a neutral glass cleaner without ammonia or isopropyl alcohol applied to a lint-free cloth.
ATTENTION:
Do not apply cleaning agent to the touchscreen; apply it to the cleaning cloth.
Use only solvents-free detergents.
Then wipe off the touchscreen with it.
