External connectors
© by DLoG GmbH
DLT-V6210 Manual V1.00
Page 41 / 61
10.1.2.
USB
−
2 x USB 2.0 Hi-Speed HOST A typ, 5 VDC 500 mA
−
Fused at 0.5 A per channel
−
ESD Level 4 protected (according to EN 61000-4-2)
10.1.3.
Network adapter (10/100/1000)
−
2 x network adapter (RJ45 connection jack) with 10/100/1000 Mbit per second
The RJ45 connection ports have two integrated status LEDs and are assigned as follows:
Fig. 10.3: RJ45 network port
Left LED (Green):
Right LED (Green + Orange):
LED off: no connection
LED off: no connection/10 Mbps
LED on: connection (link)
LED flashing: activity
LED green: 100 Mbps
LED orange: 1000 Mbps
Problems with data transmission via LAN/Ethernet
If problems occur during data transmission over LAN/Ethernet (e.g. data is lost or not detected), the
cause of these problems may be the cable is too long.
Depending on the cable layout and interference from the environment, it may be impossible to use the
cable length of 100 m given in the specification (IEEE 802.3 standard).
The recommendation in this context is to use a shorter cable.
