Operation
© by DLoG GmbH
DLT-V6210 Manual V1.00
Page 37 / 61
9. Operation
9.1.
Switching DLT-V6210 on/off
Switch on
Switch DLT-V6210 on as follows, depending on the configuration:
Press the <Power> button.
Or: Through the ignition signal of the vehicle (depends on the vehicle management / automatic
shutdown settings).
Fig. 9.1: <Power> button
Switch off
Switch DLT-V6210 off as follows, depending on the configuration:
Press the <Power> button of the activated DLT-V6210.
Or: Disconnect the supply voltage.
NOTICE
: Devices will be hard-terminated (data loss possible).
Or: Deactivate the ignition of the connected vehicle (depends on the vehicle management /
automatic shutdown settings).
Time between switching off and on: 10 seconds
After DLT-V6210 is shut down and switched off, it needs to wait at least 10 seconds until the device can
react to a switch-on signal (<Power> button / ignition).
