![background image](http://html.mh-extra.com/html/advantech/data-acquisition-modules-adam-4000/data-acquisition-modules-adam-4000_user-manual_2857997185.webp)
Chapter
5
5-39
ADAM 4000 Series User’s Manual
4018M
@AAT
Name
Read Memory Operation Mode command
Description
Request the memory operation status of the analog input
data logger at address AA.
Syntax
@AAT (cr)
@
is a delimiter character.
AA
(range 00-FF) represents the 2-character hexadecimal
address of an analog input data logger.
T
is the Read Memory Operation Mode command.
(cr)
is the terminating character, carriage return (0Dh).
Response
!AAO(cr)
if the command is valid.
!
is a delimiter character indicating a valid command was
received.
AA
(range 00-FF) represents the 2-character hexadecimal
address of an analog input module.
O
represents the operation mode:
‘1’: enables the recording of data.
‘0’: disables the recording of data.
(cr)
is the terminating character, carriage return (0Dh).
Example
command: @F3
T
(cr)
response: !F31(cr)
The command requests the memory operation status of the
analog input data logger at address F3.
The response indicates that data recording is enabled.
Summary of Contents for Data Acquisition Modules ADAM 4000
