Advantech Data Acquisition Modules ADAM 4000 User Manual Download Page 176

Page: 176 / 429

5-30

ADAM 4000 Series User’s Manual

4015, 4015T, 4017+, 4018+, 4019+

$AAXnnnn

Name

Watchdog Timer Setting command

Description

This command set the communication watchdog timer

(WDT) cycle time.

Syntax

$AAXnnnn(cr)

is a delimiter character.

(range 00-FF) represents the 2-character hexadecimal

address of the analog input module which is to be read.

is the Watchdog Timer Setting command.

nnnn

(range 0000~9999) represents the specified value of

communication cycle you want to set. (Unit: 0.1 second)

(cr)

is the terminating character, carriage return (0Dh).

Response

!AA(cr)

if the command was valid.

?AA(cr)

if an invalid operation was entered.

There is no response if the module detects a syntax error or
communication error or if the specified address does not
exist.

delimiter character indicates a valid command was

received.

delimiter character indicates the command was invalid.

(range 00-FF) represents the 2-character hexadecimal

address of the analog input module.

(cr)

represents terminating character, carriage return (0Dh).

Example

command: $02X1234(cr)

response: !02(cr)

The command set the WDT cycle as 1234 in the input
module at address 02.

NOTICE: If the value of “nnnn” is 0000, the communication WDT

function will be disable.

Summary of Contents for Data Acquisition Modules ADAM 4000














































































































































































































































































































































































































































Search results

Summary of Contents for Data Acquisition Modules ADAM 4000

Reviews:

Brands by name

Popular brands

Advantech Data Acquisition Modules ADAM 4000, User Manual

Search results

Summary of Contents for Data Acquisition Modules ADAM 4000

Reviews:

Brands by name

Popular brands