![background image](http://html.mh-extra.com/html/advantech/data-acquisition-modules-adam-4000/data-acquisition-modules-adam-4000_user-manual_2857997192.webp)
5-46
ADAM 4000 Series User’s Manual
4018M
@AABC
Name
Read Alarm Limit command
Description
Request the alarm limits for the specified channel in the
analog input data logger at address AA.
Syntax
@AABC(cr)
@
is a delimiter character.
AA
(range 00-FF) represents the 2-character hexadecimal
address of an analog input data logger.
B
is the Read Alarm Limit command.
C
represents the channel index. Its value is from 0 to 7.
(cr)
is the terminating character, carriage return (0Dh).
Response
!AASDHHHHTEIIII
!
is a delimiter character indicating a valid command was
received.
AA
(range 00-FF) represents the 2-character hexadecimal
address of an analog input data logger.
S
represents the sign of the high alarm limit.
‘+’ is for positive, and ‘-’ is for negative.
D
represents the decimal point of the high alarm limit. Its
value is from 0 to 5.
HHHH
represents the 4-character hexadecimal number of
high alarm limit.
T
represents the sign of the low alarm limit.
‘+’ is for positive, and ‘-’ is for negative.
E
represents the decimal point of the low alarm limit. Its
value is from 0 to 5.
IIII
represents the 4-character hexadecimal number of low
alarm limit.
(cr)
is the terminating character, carriage return (0Dh).
Summary of Contents for Data Acquisition Modules ADAM 4000
