3. CONFIGURATION
3.16
NTP Configuration
The
NTP
configuration form allows you to configure the NTP client. To open the
NTP
page,
click
NTP
in the
Configuration
section of the main menu. NTP (Network Time Protocol) allows
you to periodically set the internal clock of the router. The time is set from servers that provide
the exact time to network devices.
•
If you mark the
Enable local NTP service
check box, then the router acts as a NTP server
for other devices in the local network (LAN).
•
If you mark the
Synchronize clock with NTP server
check box, then the router acts as a
NTP client. This means that the router automatically adjusts the internal clock every 24
hours.
Item
Description
Primary NTP Server
Address
IP or domain address of primary NTP server.
Secondary NTP
Server Address
IP or domain address of secondary NTP server.
Timezone
Specifies the time zone where you installed the router.
Daylight Saving Time
Activates/deactivates the DST shift.
•
No
– The time shift is inactive.
•
Yes
– The time shift is active.
Table 47: NTP Configuration
The figure below displays an example of a NTP configuration with the primary server set
to ntp.cesnet.cz and the secondary server set to tik.cesnet.cz and with the automatic change
for daylight saving time enabled.
Figure 45: Example of NTP Configuration
78
Summary of Contents for B+B SmartWorx LR77 v2
