Advantech B+B SmartWorx LR77 v2, Configuration Manual

Page: 35 / 135

3. CONFIGURATION
3.3 Mobile WAN Configuration
The XR5i v2 routers do not display the Mobile WAN configuration option.
Select the Mobile WAN item in the Configuration menu section to enter the cellular network
configuration page.
3.3.1 Connection to Mobile Network
If you mark the Create connection to mobile network checkbox, then the router automati-
cally attempts to establish a connection after booting up. You can specify the following param-
eters for each SIM card separately (on FULL version of the router with two SIM card slots), or
to toggle between the APNs on single SIM card, specify two different APNs (BASIC version of
the router with single SIM card slot).
Item Description
APN Network identifier (Access Point Name)
Username User name for logging into the GSM network
Password Password for logging into the GSM network
Authentication Authentication protocol in the GSM network:
•
PAP or CHAP
– The router selects the authentication method.
• PAP – The router uses the PAP authentication method.
•
CHAP – The router uses the CHAP authentication method.
IP Address Specifies the IP address of SIM card. You manually enter the IP ad-
dress, only when mobile network carrier assigned the IP address.
Phone Number Specifies the telephone number the router dials for a GPRS or CSD
connection. The router uses a default telephone number *99***1 #.
Operator Specifies the carrier code. You can specify the parameter as the PLNM
preferred carrier code.
Network type Specifies the type of protocol used in the mobile network.
•
Automatic selection – The router automatically selects the trans-
mission method according to the availability of transmission tech-
nology.
•
Furthermore, according to the type of router – It’s also possible to
select a specific method of data transmission (GPRS, UMTS, . . . )
Continued on next page
28