3. CONFIGURATION
If you enable the following options and enter the port number, the router allows you to
remotely access to the router from a PPP interface.
Item
Description
Enable remote HTTP access on port
If field and port number are filled in, configura-
tion of the router over web interface is allowed
(disabled in default configuration).
Enable remote HTTPS access on port
If field and port number are filled in, configura-
tion of the router over web interface is allowed
(disabled in default configuration).
Enable remote FTP access on port
Select this option to allow the router using FTP.
Enable remote SSH access on port
Select this option to allow access to the router
using SSH (disabled in default configuration).
Enable remote Telnet access on port
Select this option to allow the router using Telnet.
Enable remote SNMP access on port
Select this option to allow access to the router
using SNMP (disabled in default configuration).
Masquerade outgoing packets
Activates/deactivates the network address trans-
lation function.
Table 35: Remote Access Configuration
Example 1:
NAT configuration with one connection to the router:
Figure 30: Example 1 – Topology of NAT Configuration
54
Summary of Contents for B+B SmartWorx LR77 v2
