Advanced LAN Bypass, User Manual

Page: 76 / 82

Advanced LAN Bypass User Manual 66
4.41 ./lbpcu -CBTEST
Starts scanning an event thread and then uses a test callback function (cf. Section
3.7.5.2).
Example
Figure 4.59 Enable the Event Change Detect Thread
root@localhost:~# ./lbpcu -CBTEST E
Example: Enable event change detect thread and register call-
back function. So use -CBTEST to start.
Command: Enable thread and register callback function
Syntax: CBTEST
Output: N/A
Error: LBP_ERR_PARAM_OUT_OF_BOUND (0x93)
root@localhost:~# ./lbpcu -RAW
root@localhost:~# ./lbpcu -CBTEST
scan event thread id: b87a1700
seg: 1 last event: WATCHDOG_START
seg: 1 last action: BYPASS
seg: 2 last event: WATCHDOG_START
seg: 2 last action: BYPASS
seg: 1 last event: WATCHDOG_START
seg: 1 last action: BYPASS
seg: 2 last event: WATCHDOG_START
seg: 2 last action: BYPASS
seg: 1 last event: WATCHDOG_START
seg: 1 last action: BYPASS
seg: 2 last event: WATCHDOG_START
seg: 2 last action: BYPASS
seg: 1 last event: WATCHDOG_TIMEOUT
seg: 1 last action: DISCONNECT
seg 1 event changed!
enter callback seg 1 event 5
seg: 2 last event: WATCHDOG_TIMEOUT
seg: 2 last action: DISCONNECT
seg 2 event changed!
enter callback seg 2 event 5