Advanced LAN Bypass, User Manual

Page: 69 / 82

59 Advanced LAN Bypass User Manual
Chapter 4
L
BPCU
4.27 ./lbpcu -GBCT
Gets the bypass control type on a specified segment (cf. Section 3.7.9.2).
Example
Figure 4.43 Get the Bypass Control Type on Segment 1
4.28 ./lbpcu -SBL
Sets the ON duty cycle and blinking period for LED indication in response to a
BYPASS action on a specified segment (cf. Section 3.7.10.1).
Example
Figure 4.44 Set the LED ON/OFF Settings for a BYPASS Action on Segment 1
root@localhost:~# ./lbpcu -GBCT
Example: The bypass control type is copper on segment_1. So
use -GBCT 1 will get copper bypass control type.
Command: Get bypass control type.
Syntax: GBCT <segment>
Output: Bypass control type.
Error: LBP_ERR_PARAM_OUT_OF_BOUND (0x93)
root@localhost:~# ./lbpcu -GBCT 1
Bypass control type: FIBER
root@localhost:~# ./lbpcu -SBL
Example: Set segment 1 50(%) duty cycle of 500ms period for
bypass led indication. So use -SBL 1 50 5 will set 50(%) for
duty cycle and 500ms for period.
Command: Set duty and period for bypass led indication.
Syntax: SBL <segment> <duty(%)> <period(100ms/count)>
Output: N/A
NOTE: This setting will apply to both segments on the same NMC
card
Error: LBP_ERR_PARAM_OUT_OF_BOUND (0x93)
root@localhost:~# ./lbpcu -SBL 1 30 10