Advanced LAN Bypass, User Manual

Page: 56 / 82

Advanced LAN Bypass User Manual 46
4.7 ./lbpcu -SA
Sets the current action for the specified event on a specific segment (cf. Section
3.7.3.2):
Figure 4.10 Usage of the "lbpcu -SA" Command
Example
Set BYPASS as the current action for the POWER_OFF event on Segment 1:
Figure 4.11 Set BYPASS Action for the POWER_OFF Event on Segment 1
root@localhost:~# ./lbpcu -SA
Example: Set segment_1 as BYPASS action for POWER_OFF event.
So use -SA 1 POWER_OFF BYPASS will set BYPASS action for
POWER_OFF event on segment_1
Command: Set Action
Syntax: SA <segment> <event> <action>
Output: N/A
event list:
POWER_ON
POWER_OFF
POWER_RST
WATCHDOG_START
WATCHDOG_TIMEOUT
EXTERNAL_TRIGGER
BUTTON_EVENT_1
BUTTON_EVENT_2
action list:
CONNECT
DISCONNECT
BYPASS
DO_NOT_CHANGE
Error: LBP_ERR_PARAM_OUT_OF_BOUND (0x93)
root@localhost:~# ./lbpcu -SA 1 POWER_OFF BYPASS
root@localhost:~# ./lbpcu -GA 1 POWER_OFF
Event: POWER_OFF
Action: BYPASS