Advanced LAN Bypass, User Manual

Page: 74 / 82

Advanced LAN Bypass User Manual 64
4.37 ./lbpcu -StopAW
Stops the WDT of all segments (cf. Section 3.7.4.4).
Example
Figure 4.54 Stop WDT on All Segments
4.38 ./lbpcu -SAWT
Sends the WDT start sequence through the toggle pin interface on all segments (cf.
Section 3.7.5.3).
Example
Figure 4.55 Send the WDT Start Sequence on All Segments
root@localhost:~# ./lbpcu -StopAW E
Example: Stop the Watch_Dog_Timer of all segments. So use -
StopAW will stop WDT counting on all segments
Command: Stop WDT
Syntax: StopAW
Output: N/A
Error: LBP_ERR_PARAM_OUT_OF_BOUND (0x93)
root@localhost:~# ./lbpcu -StopAW
root@localhost:~#
root@localhost:~# ./lbpcu -SAWT E
Example: Start wdt by toggle on all segments. So use -SAWT
will send a spcific Toggle signal for toggling on all seg-
ments.
Command: Start wdt by toggle
note: Toggle pin WDT mode needs to be enabled & armed.
Syntax: SAWT
Output: N/A
Error: LBP_ERR_PARAM_OUT_OF_BOUND (0x93)
root@localhost:~# ./lbpcu -SAWT
root@localhost:~#