Advanced LAN Bypass, User Manual

Page: 25 / 82

15 Advanced LAN Bypass User Manual
Chapter 2
O
VERVIEW
0x8A LBP_ERR_FW_NRDY
The FW is not ready or the FW is busy
(timeout)
0x8B LBP_ERR_FW_CS FW checksum is invalid
0x8C LBP_ERR_DATA_FORMAT
Erroneous file format of the FW
upgrade image; please check the
upgrade image file
0x8D LBP_ERR_GET_FW_MODE Cannot enter FW mode
0x8E LBP_ERR_UNLOCK_FLASH Cannot unlock the flash
0x8F
LBP_ERR_SWITCH_TO_BOOTLOA
DER
Cannot switch to the boot loader
0x90 LBP_ERR_START_TRANSFER Cannot start the transfer
0x91 LBP_ERR_SWITCH_TO_APP Cannot switch to the application
0x92 LBP_ERR_COMMUNICATION FW upgrade communication failure
0x93
LBP_ERR_PARAM_OUT_OF_BOUN
D
Parameter is out of range; please
check the correctness of the input
parameter
0x94 LBP_ERR_PARAM_NULL_POINTER
Null pointer parameter is specified;
please check the API call for correct-
ness
0x95 LBP_ERR_LBP_INIT
LBP initialization check error; the LBP
library needs to be initialized first
before any other function calls
0x96
LBP_ERR_COMMAND_NOT_SUPP
ORT
Command unsupported; please check
whether the command is supported on
the current FW protocol version (FW
update required?)
0x97 LBP_ERR_GPIO_SET Failed to set GPIO
0x98 LBP_ERR_DEVICE_TYPE
Unknown device type found in the
configuration file; please check the
configuration file
0x99 LBP_ERR_NFP_CONNECTION
Failed to open socket to NFP from the
x86 side
0x9A LBP_ERR_NFP_SYNC Data transfer incomplete
0x9B LBP_ERR_NFP_ACCESS Cannot access NFP
0x9C LBP_ERR_NFP_PARAMETER NFP parameter error
0xE0 NACK_CMD Invalid command
0xE1 NACK_PARAM FW parameter is out of range
0xE2 NACK_CS Checksum mismatch
0xE3 NACK_CURRENT_STATE
Cannot perform the action in the cur-
rent state