manualshive.com logo in svg

Advanced Axis AX-CTL-1L, Installation & Operation Manual

Share
Download
Advanced Axis AX-CTL-1L Installation & Operation Manual Download Page 99

 

 

www.advancedco.com 

 

99

7.8.3 Enable Menu 

When selecting the Enable Menu Option, the display shows the available Enable Functions.  

[Enable]                  User 1 Node  1 

 

   

ZONE/INPUTS

   OUTPUTS       GROUPS 

   REMOTE  

 
Press the 



 buttons to highlight the required menu option and then press the 

✔

 button to select it. 

7.8.3.1  Enable - Zones and Inputs 

Selecting this option will show a list of zones containing disabled input devices. Either the complete zone or 
individual devices within the zone can then be enabled. 

 

 

 

 

 

7.8.3.2  Enable - Outputs 

When this option is selected a pop-up menu appears asking if you want to enable ALL OUTPUTS, NACS, RELAYS 
or ONLY SELECTED OUTPUTS.  If ONLY SELECTED OUTPUTS is selected, the display will list only zones 
containing outputs that have been disabled. The individual outputs within the zone can then be enabled. 

 

 ALL OUTPUTS            

.

  

 NACS 

 RELAYS 

 ONLY SELECTED OUTPUTS 

7.8.4 Test Menu 

[Test Menu]               User 1 Node  1 

 

    

ZONES

   DISPLAY   BUZZER   PRINTER 

    OUTPUTS 

 

Note: If a printer is connected to the system all tests will be sent to the printer. 

Press the 



 buttons to highlight the required menu option and then press the 

✔

 button to select it. 

7.8.4.1 Test 

Zones 

The Test Zones function provides a means to implement a one-person walk test in order to test specific pull 
stations, detectors or any other input or output device in one or more zones.  

If the current User ID (access level password) does not have the required authority, the display prompts for entry of 
an authorized password to guard against inadvertent changes. 

 

 

 

 

 

[ 4 ZONE(s) with INPUTS DISABLED]  More> 

Zone    Mode         Location 

0001

    Disabled     BASEMENT WEST 

0002    Disabled     BASEMENT EAST  

0008    Disabled     GROUND FLOOR 

0009    Disabled     MAIN RECEPTION AREA 

Summary of Contents for Axis AX-CTL-1L























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands