Advanced Poly-Packaging Ti-1000, Operation Manual

Page: 61 / 70

seconds, turn on the power and re-
download. If the ribbon takes off
running, replace the CPU board. 4.
J.
Reset parameters refer to pg. 48
(parameter settings).
36. How many labels can
you download at (1) time? Based on demo or liscensed
label view software. 9999 when sentinel key plugs
into LPT1 port.
99 when software is in “Demo
Mode”.
You can do consecutive
downloads to achieve the correct
number of labels needed to print.
37. Software I have (other
than labelview) doesn’t
have tec drivers, where do
I get them from? Software used does not have
TEC drivers. Go to “www.Seagull
Scientific.com”, and down load the
TEC 472 or 572 driver. Click on
“File” select printer. Click on
install, go to available print drivers
and highlight specific driver and
click on OK. Click on connect, and
choose available COM port, click
OK, click OK, now you have your
correct driver.
38. When printing a label
with a graphic, graphic
gets eliminated after
printing format on poly
bag. Software setting incorrect. Go to “configuration” and make
sure that graphic overwrite has a
check mark in the box.
39. Ti-1000 when down
loading a label with a
picture or PCX file, etc.,
Label downloads but omits
the picture and comes up
with error when printing. Incorrect Software Settings. Go to “configuration” and make
sure that scalable font on conversion
and graphic overwrites have a check
mark in the box.
40. Printer on COM1 is
not “on-line”. 1. Incorrect setting in windows.
2. Defective or incorrect COM
port.
3. Incorrect setting.
Go into windows print manager
and check to see if COM1 or 2 ports
are available. If not, add com port
in “My Computer”.
Try COM2, COM3, to
determine the correct COM port.
Go to “My Computer”, double
click, double click on “Control
Panel”, double click on “Systems”,
click on “Device Manager”. Double
click on ports (COM & LPT) double
click on your Com port, go to port
settings & click once, the screen
should read: E
I.
Bits per second - 9600
II. Data bits - 8
III. Parity - none