Advanced Poly-Packaging Ti-1000, Operation Manual

Page: 39 / 70

The following table describes the values and default settings of each menu option.
MENU OPTION PARAMETER VALUE LIMITS DESCRIPTION DEFAULT
DIAGNOSTICS WARNING: THIS FUNCTION IS FOR FACTORY TESTING ONLY. DO NOT USE!
FEED ADJUST -50.0 to +50.0mm NOT USED +0.0mm
PARAMETER SET CUT ADJUST -50.0 to +50.0mm NOT USED +0.0mm
BACK FEED ADJ. -9.5 to +9.5mm NOT USED +0.0mm
X ADJUST -99.5 to +99.5mm Adjust X axis starting position +0.0mm
TONE ADJUST <T> -10 to +10 Adjust tonal quality -10
TONE ADJUST <D> -10 to +10 Adjust tonal quality 10
FONT CODE PC-8, PC-850 Selects character code PC-850
ZERO FONT O,Ø Sets slash / no slash in zero O
CODE (AUTO),({,I,}),
(ESC,LF,NULL
)
Selects Automatic or manual
control code AUTO
RIBBON TRANS, NON-TRANS Ribbon type, transmissive or
non-transmissive TRANS.
TEST PRINT WARNING: THIS FUNCTION IS FOR FACTORY TESTING ONLY. DO NOT USE!
SENSOR ADJUST WARNING: THIS FUNCTION IS FOR FACTORY CALIBRATION ONLY. REFER TO
MANUFACTURER FOR PROPER SETTINGS.
RAM CLEAR WARNING: THIS FUNCTION IS FOR FACTORY USE ONLY. DO NOT USE!
Note: In order to save any changes to the parameters, you must return to the main option. Press the
PAUSE button several times until the main option is displayed.
Caution: Changing the following settings may cause the printer to malfunction.