Advanced Poly-Packaging Ti-1000, Operation Manual

Page: 38 / 70

4.5 Label Counter
When the printing is halted with the <PAUSE> key, the number of remaining downloaded labels of the
current que is displayed. Since several label formats can be downloaded into the memory at one time,
the display only shows the number of labels yet to print of the current format. Once all labels of the
current que have been printed, the next format will reset the counter to the number of downloaded label
of the new format.
Labels can be downloaded while the printer is printing ("on the fly") without loss of production. After
the last label of the current print has printed, the next label starts to print immediately.
4.6 Clearing the Printer Memory
After printing has been halted using the <PAUSE> key, the memory may be cleared so that the current
job in memory will no longer print. To clear the memory so that another label may be downloaded,
simply turn the power to the print OFF, wait 5 seconds and turn the power to the ON position.
Note: When the power is turned OFF, all downloaded label formats will be erased from memory.
4.7 Parameter Settings
In order to activate the parameters menu, press and hold the FEED and PAUSE buttons while turning
the power ON. Hold the buttons until the following message appears:
<1> DIAGNOSTIC
To scroll through the menu, press the FEED button to advance forward and press the RESTART button
to advance
back. The menu options are as follows:
<1> DIAGNOSTICS
<2> PARAMETER SET
<3> TEST PRINT
<4> SENSOR ADJUSTMENT
<5> RAM CLEAR
Once the desired menu option has been located and is highlighted, press the PAUSE button to select the
option. The first parameter for that option will appear.
Press the FEED button to increase the value of the selected parameter, press the RESTART button to
decrease the value of the selected parameter. To select the next parameter press the PAUSE button
again.