Chapter 5. Using the Terminal Menu
61200226L1-1
ATLAS
_
800
PLUS
User Manual
5-51
switch for this line. Each BRI may have one or more phone numbers and SPIDs.
The
SPID Number
list submenu defines to ATLAS these parameters.
Octal BRI Module (User Termination)
The Octal BRI with a “U” interface is capable of acting like the Network while
interfacing to user equipment (terminal adapters). When you are working in the
Network Termination
section of the
Dial Plan
menu and the
Slot
is defined as a
UBRI-8 module, the following interface configuration options are available:
Switch Type
Write security: 2; Read security: 5
Defines the type of ISDN switch that ATLAS will simulate. If connected to
another ATLAS, both need to be set to the same type. The following options are
available:
•
Lucent 5E
•
Northern DMS 100
•
National ISDN
SPID List
Write security: 2; Read security: 5
ATLAS, acting as the Network, must use a SPID and a phone number in order to
satisfy the ISDN connection protocol expected by the User’s Terminal Adapter
(TA).
Phone Number
The phone number(s) assigned to this BRI phone line.
SPID Number
This entry must match the SPID number(s) which have
been set in the Network’s ISDN switch (or in the PBX)
for this BRI line. A SPID must be entered for each
phone number.
Calls
The number of calls (1 or 2) which can be received or
sent on this number/SPID.
These options reflect what the Network has
provisioned for this SPID. If the BRI was purchased
with different services provisioned for the SPIDs, then
the call must match the services supported.
Phone Number
The phone number(s) assigned to this BRI phone line.
SPID Number
This entry will define the SPID number(s) which will be
used for this BRI line. Although the value of the SPID is
not significant, a SPID must be entered for each phone
number. For convenience, the SPID can be set to be
the same as the phone number.
ATLAS
_
800
PLUS
does not support autoSPID detection soft-
ware which some terminal adapters offer.
D64
D56
Audio
Speech
Summary of Contents for ATLAS 800PLUS
