Chapter 3. Operation
61200226L1-1
ATLAS
_
800
PLUS
User Manual
3-5
OPERATING THE ATLAS 800
PLUS
You can access basic setup functions from the ATLAS
_
800
PLUS
front panel. To
access all of the ATLAS
_
800
PLUS
functions, set up a Telnet session or use a VT-100.
The following sections provide an overview of the different ways to operate the
ATLAS
_
800
PLUS
. After you understand the different ways to operate the
ATLAS
_
800
PLUS
, you will be ready to configure the unit.
Getting Started Using the Front Panel
With the ATLAS
_
800
PLUS
powered-up, the front panel LCD window displays var-
ious menu items. To select a menu item, either press the corresponding number
on the front panel keypad or press the front panel up and down arrows to scroll to
the menu selection. The following steps describe how to set up the Unit ID from
the front panel (see also Figure 3-2).
1.
Activate Configuration (
CONFIG
) using the front panel
arrow keys
or by
pressing
2
. (The cursor flashes on the number next to the activated selection.)
Press
Enter
.
2.
Use the
arrow keys
to view the submenu items.
3.
Select
S0) SYSTEM
. Press
Enter
.
4.
Activate
2) CHAIN PORT
using the
arrow keys
or by pressing
2
. Press
Enter
.
5.
Activate
4) UNIT ID
using the
arrow keys
or by pressing
4
. Press
Enter
.
6.
The Unit ID field displays. Type the new Unit ID in this field and press
Enter
.
The new Unit ID is now set.
Figure 3-2. Example of Basic Front Panel Menu Navigation
For detailed information about the commands available through the front panel
menus, see “Front Panel Operation and Menu Structure” on page 4-1.
Getting Started Using Terminal Menus
Terminal menus provide one of the primary means of monitoring and configuring
the ATLAS
_
800
PLUS
. The terminal menu interface uses the full capabilities of the
VT-100 terminal to provide the quickest and most intuitive operation possible. To
receive the full benefit of the terminal menu interface, you should use a fully
VT-100 compatible client. The ADTRAN Utilities floppy disks (that you can install
on a PC) contain both a VT-100 client and a customized Telnet program. See
“ADTRAN Utilities” on page 10-1 for details on the available programs.
1) ETHERNET
1) BAUD RT 9600
S0) SYSTEM
2) FLOW CTL
2) CONFIG
S1)
2) CHAIN PORT
3) TYPE
:
4) UNIT ID
S8)
5) INIT MODEM
Summary of Contents for ATLAS 800PLUS
