ADTRAN ATLAS 800PLUS, User Manual

Page: 111 / 166

Chapter 7. Creating a Dial Plan
61200226L1-1 ATLAS 800
PLUS
User Manual 7-3
Plan the Dial Plan
1. Determine the provisioning of the Network, and the attached equipment
(video equipment and PBX).
2. Enter the local Area Code number (needed for Caller ID operation) under the
Global Parameter submenu below the Dial Plan menu.
3. Determine which ports are Network Terminations and which are User
Terminations. Define the phone number acceptance and rejection criteria for
each.
Network PRI Type of PRI switch being provided:
National ISDN
DMS 100 custom
4ESS custom
5ESS custom
DID- Number of digits
Type of BRI switch being provided:
National ISDN
DMS 100 custom
5ESS custom
SPID(s) and phone number(s) provisioned for the BRI
line
User
Equipment PRI
Switch type the user equipment expects to interface to
(ATLAS supports 5ESS custom.
DID
Number of digits.
BRI
Switch type the User equipment expects to interface
to (ATLAS supports National ISDN, 5ESS custom and
DMS 100 custom). SPID and phone numbers
provisioned in equipment.
T1 RBS
DID enabled on PBX/Number of digits; Signaling
(E&M/Loop Start/Ground Start).