ADTRAN ATLAS 800PLUS, User Manual

Page: 76 / 166

Chapter 5. Using the Terminal Menu
5-24 ATLAS
_
800
PLUS
User Manual 61200226L1-1
If a module is installed, the module type automatically displays the name of the
installed module, and cannot be set to any other option.
Menu
Displays additional status and configuration menus for the selected module. To
access the submenus for this item, use the
Arrow Keys to scroll to the Menu col-
umn for the module you want to edit, and press Enter . For detailed information
on each submenu item, see “ATLAS_ 800PLUS Controller T1/PRI Submenu
Items” on page 5-25.
Only the submenu items for the base T1/PRI menus are described in this manual.
Alarm
Read security: 5
Displays whether there is an alarm condition on the ATLAS
_ 800
PLUS
base unit.
Press Enter to access the
Alarm
menu. (Read-only field.)
Test
Read security: 5
Displays whether the ATLAS
_ 800
PLUS
is executing a test. To initiate a test, choose
the
Menu
submenu on this screen. Then, select the Test option to access the screen
that allows you to set up and initiate tests. See “Test” on page 5-24 for details.
Press
Enter to access the
Test
menu.
State
Write security: 3; Read security: 5
Displays whether the module is online of offline. Even though a module is physi-
cally installed, it must be marked
Online for it to be considered an available
resource. This parameter allows an installed module to be marked Offline , which
may be useful in system troubleshooting. If you choose Offline , the module will
not be in alarm condition, but will display Offline .
Once a module is installed, you must change the state to Online in order for the
ATLAS to utilize the module for any data bandwidth.
Status
Read security: 5
Displays status information on the ATLAS
_ 800
PLUS
T1/PRI ports and other
installed modules. The following messages may display:
Online
The module is enabled and is responding to the system controller’s status
polls. This is the normal response of the system.
No Response
The module is enabled but is not responding to the system controller’s status
polls. This response indicates a problem in the system or that the module is
not installed.