ADTRAN ATLAS 800PLUS, User Manual

Page: 118 / 166

Chapter 8. Updating Firmware
8-2 ATLAS
_
800
PLUS
User Manual 61200226L1-1
A Level 2 password is required for performing updates of any module within
ATLAS. Please consult the ATLAS administrator if you do not know the
password.
3. Select the
System Utility
menu.
4. Select
Update Firmware
. Figure 8-1 shows the
Update Firmware
menu.
Figure 8-1. Update Firmware Menu Interface
5. Move to the
Module Slot
field.
6. Press Enter and select the appropriate module slot to update.
To update multiple modules of the same type, select
All Modules of a Type
from
the
Module Slot
field.
After selecting a slot number, the
Module Type
field updates to reflect the type
of unit selected. This field is read-only.
7. The
Module Type
field is normally a read-only field indicating the type of
module that is currently in the selected slot. If you choose
All Modules of a
Type
for the
Module Slot
field, the
Module Type
field becomes configurable to
indicate what type of modules to update in the ATLAS. Select the
appropriate module type for the particular update.
Only modules which are upgradable are displayed as choices for the
Module Type
field when updating all modules of a type in the ATLAS.
8. Select
XMODEM
for the
Transfer Method
field.
9. In the
Restart Schedule
field, select the desired time for the module to
perform a restart after completing the update process. Restarting the
ATLAS
_ 800
PLUS
invokes the new code. For the system controller, you can
select either
Restart Immediately After Update
or
Restart at Specified Date and
Time
. The
Restart Immediately After Update
option instructs ATLAS to
automatically restart the module immediately after the update process has