Adtec Soloist 2 Technical Manual Download Page 175

Page: 175 / 199

Command Interface 98 - 99

Error Appendix

NOTE: This is not a complete list of Error codes for the Soloist. This list will be

changing on an as needed basis. Therefore, it is important to check these codes
frequently

ERROR TABLE

NUM

DESCRIPTION

ERROR- EMPTY

No spots, unit is empty

ERROR- BAD ARGUMENTS

Argument(s) is/are missing or invalid.

ERROR- NO SPOT

Spot does not exist.

ERROR- TRANSPORTATION

Transport in use, no drive access allowed.

ERROR- PLAYLIST

Playlist has entries, no cueing allowed.

ERROR- LOAD FAILED

Load Failed – Flash ROM failure.

ERROR- SAVE FAILED

Save Failed – Flash ROM failure.

ERROR- ERASE FAILED

Erase Failed – Flash ROM failure.

ERROR- CLOCK FAILED

Clock Failed

ERROR- SCHEDULE NOT
ADDED

Schedule event not added.

ERROR- LIST NOT ADDED

List event not added.

ERROR- BAD S RECORD

Bad S Record.

ERROR- PROGRAM FAILED

Programming failed – Flash ROM failure.

ERROR- UNKNOWN FILE
SYSTEM

System file type is unknown.

ERROR- NO SYSTEM FILE

System file type is unknown.

ERROR- SYSTEM FILE IS
TOO BIG

System file is too big.

ERROR- DISC READ FAIL

Disc read fail.

ERROR- DISC WRITE FAIL

Disc write fail.

ERROR- LAN NOT READY

Lan task not ready.

ERROR- NOT PINGING

Not Pinging.

ERROR- ALREADY
PINGING

Already Pinging.

ERROR- NOT FTPING

Not FTPing.

ERROR- ALREA DY FTPING

Already FTPing.

ERROR- NO HOST IP

No host IP address.

ERROR- NO FILE

150

No file.

ERROR- NO FILENAME

151

No Filename.

ERROR- FILE EXISTS

152

File already exists.

ERROR- NO DRIVE DISC

153

No drive/disc.

ERROR- NO DRIVE

154

No drive.

ERROR- NO DISC

155

No disc.

ERROR- CREATE FAILED

156

Create failed.

ERROR- RESIZE FAILED

156

Resize failed.

ERROR- READ ONLY

157

Read only file.

ERROR- WRITE LOCKED

158

File write locked.

ERROR- READ LOCKED

159

File read locked.

ERROR- ALREADY OPEN

160

Already open.

Summary of Contents for Soloist 2








































































































































































































Search results

Summary of Contents for Soloist 2

Reviews:

Related manuals for Soloist 2

Brands by name

Popular brands

Adtec Soloist 2, Technical Manual

Search results

Summary of Contents for Soloist 2

Reviews:

Related manuals for Soloist 2

Brands by name

Popular brands