M
IRAGE
and S
OLOIST
Locations
BROADCAST MPEG 2 PLAYER
Version 2.0
Locations-Page 6 of 7
ADTEC, Inc. USA
Locations
Locations
Connecting to a
Location
To connect to a Location, click the pull down and select the location name. To
disconnect, click the pull down and select disconnect. If the Location utilizes
dial up, the following Atapi line reply will be displayed during the dial up
process. Two attempts will be made to connect before the process is canceled. If
the Location is a Direct connect, the connection is made immediately.
Once the connection is made, Open the Console Applet and select the Unit to
make the connection. The Unit pull-down is located at the top of the screen in
Console.
.
Status bar displaying connection information.
The Location is displayed in the bottom left column, the serial parameters are in
the center column and the right column displays the comment.
\
To connect to a location click the
Connection pull down option and
highlight the desired location.
\
When using dial up as the
connection the session will be
terminated after 3 minutes of
inactivity.
\
To connect to a unit click the Unit
pull down option and highlight the
desired unit.
