manualshive.com logo in svg

Adtec Soloist 2, Technical Manual, Page: 82 / 199

Share
Download
Adtec Soloist 2 Technical Manual Download Page 82

Command Interface 5 - 99 

  

 

Example of Command Description 

 

NAME  NAM*  NA 

*NOTE:  The compact form of the command will not work in the Soloist 1.  Please 

use Verbose and Terse only. 

 

Description- 

Displays or changes the name used to address the unit. 

 

Form- 

NAME/NAM/NA [SETTING] 

           VERBOSE/COMPACT/TERSE forms of the command   
 
Arguments- Table format, listing all possible combinations. 
 

SETTING 

NUM 

DESCRIPTION 

Name 

Alpha-Numeric 

The name of the unit can be up to 20 alpha-numeric 
characters in length. 

 

Errors-  Error are explained in the Error Appendix. 
 

ERROR TEXT 

NUM 

DESCRIPTION 

ERROR- BAD ARGUMENTS 

2 

Argument(s) is/are missing or invalid 

 
Examples-  Terminal form 
 

Operation

-

 

Display the current NAME setting. 

<NAME> NAME 

OK 
NAME= SOLOIST  
<Empty Line>

 

 

Operation

-

 

Set the NAME to COMEDY. 

<NAME> NAME COMEDY 

OK 
<Empty Line>

 

 
Products Supported-  

Soloist 1, Soloist 2, Mirage, and Duet 

                            These are the products that this particular command supports.  

 

See Also-  

Query 

              

Related command or families of commands. 

 

 
 
 

Summary of Contents for Soloist 2








































































































































































































Reviews:

No comments