manualshive.com logo in svg

Adtec Soloist 2, Technical Manual, Page: 169 / 199

Share
Download
Adtec Soloist 2 Technical Manual Download Page 169

Command Interface 92 - 99 

  

 

UNITS  UNT  UN 

 
Description- 

Display the units with the specified DD filter.  

 
Form- 

UNITS/UNT/UN [DD] 

 
Arguments- 

DDSN 
NUM 

DESCRIPTION 

Drive 
number 

Setting allows the user to look at a single drive in the unit. 
The DD option may include wildcards, and it is used as a 
mask for the display. 

 
Errors- 
 

ERROR TEXT 

NUM 

DESCRIPTION 

ERROR- BAD ARGUMENTS 

2 

Argument (s) is/are missing or invalid. 

 
 
NOTE:

  

The units will report all of the drive and disc parameters, including: Drive, 

Disc, Unit Type, Media Type, Partitions, Discs, Size Capacity, Size Used, Size Available, 
File Capacity, Files Used, Files Available, and Description. For every drive and disc that 
matches the arguments, a listing will be generated. If the disc is wildcarded, then for 
every drive found a listing would be made for each disc and the total for all discs on the 
drive. If both the drive and disc are wildcarded, then for every drive found a listing will 
be made for each disc and the total for all discs on the drive, and a total for all drives. If 
the listing is for a specific drive disc (both drive and disc valid), then the Description is 
the volume label. If the listing is for all discs on a drive (drive valid and disc is 255 if 
terse), then all size and file fields are the total of all discs on the drive and the description 
is MODEL_NAME/FIRMWARE REVISION/SERIAL_NUMBER] if ATAPI/ATA, or 
[VENDOR_ID/ PRODUCT_ID/ROM_REVISION] if SCSI. If the listing is for all drives 
and discs (both drive and disc are 255 if terse), then unit type holds the total number of 
drives, media type holds the number of different media types, all size and file fields are 
the total of all drives and discs, and description is the Soloist Name. 
 

 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for Soloist 2








































































































































































































Reviews:

No comments