manualshive.com logo in svg

Adtec Soloist 2, Technical Manual, Page: 130 / 199

Share
Download
Adtec Soloist 2 Technical Manual Download Page 130

Command Interface 53 - 99 

  

 

OUTPUT  OUT  OT 

 
Description- 

The mode of the current video output.   

 
Form- 

OUTPUT/OUT/OT [SETTING] 

 
Arguments- 

SETTING 
TEXT 

NUM 

DESCRIPTION 

Composite 

0 

Video picture information for color, brightness, and sync 

Component 

1 

B – Y, R – Y, and Y signals. 

RGB 

2 

Red, Green, and Blue signals. 

 
Errors- 
 

ERROR TEXT 

NUM 

DESCRIPTION 

ERROR- BAD ARGUMENTS 

2 

Argument (s) is/are missing or invalid. 

ERROR- FEATURE LOCKED 

 

Feature is locked, key code needed to 
activate 

 
Examples- 
 

Operation

-

 

Display the current OUTPUT setting. 

<NAME> OUTPUT 

OK 
OUTPUT= COMPOSITE 
<Empty Line>

 

 

Operation

-

 

Set the OUTPUT setting to COMPOSITE whenever playing. 

<NAME> OUTPUT COMPOSITE 

OK 
<Empty Line>

 

 
Products Supported-  

Soloist 2, Mirage, and Duet 

 

Related Commands- 

BLANK, VIDEO

 

 

 

 
 
 

Summary of Contents for Soloist 2








































































































































































































Reviews:

No comments