M
IRAGE and
S
OLOIST
Console
BROADCAST MPEG 2 PLAYER
Version 3.0
Console-Page 25 of 41
ADTEC, Inc. USA
Console
Console
Unit IP Settings continued
IP MASK
The IP mask is the mutual IP locator that designates the address for a
network. Each Soloist 2 in a given LAN
should have
the same IP mask
for the Mirage/Soloist 2 to function within the network.
HOSTMODE
The host mode determines the functionality of the Mirage/Soloist 2 in a
given networking environment.
Host Mode
Functionality
Client
The Mirage/Soloist takes on the roll as a traditional
networking client.
Server
The Mirage/Soloist takes on the roll as a traditional
networking server. It can service requests from all
clients on the network. File transfers can be made
directly to a server via FTP from any client.
Mirror Client
It can make requests to a server for data but cannot
respond to server type requests. If a Host IP Address
is entered and valid, the mirror client will
automatically mirror the host IP address of the server.
No data will be deleted until the storage is full and at
that time the oldest date code files not used in a
schedule or list will be deleted. It is recommended to
maintain the client via file manager for data deletion.
Mirror Server
Same as server.
Duet Client
Client for use with Duet insertion modules. Same
functionality as Mirror Client.
Duet Server
Server for use with Duet insertion modules.
AdMaestro Client
Client for use with AdMaestro commercial inserters.
Same functionality as Mirror Client.
AdMaestro Server
Client for use with AdMaestro commercial inserters.
HOST IP ADDRESSES
The Soloist can have up to four
Host IP Addresses
. Each address
represents the address of a server the Mirage/Soloist 2 will
automatically mirror if the host mode is set to client (Mirror Client,
Duet Client., Admaestro Client).
\
Mirror (Duet and AdMaestro)
Client modes with out a Host IP
Address will NOT mirror. You
must have at least one Host IP
Address and host mode set to any
type of client to mirror.
