manualshive.com logo in svg

Adtec Soloist 2, Technical Manual, Page: 113 / 199

Share
Download
Adtec Soloist 2 Technical Manual Download Page 113

Command Interface 36 - 99 

  

 

HOSTIPADDRESS  HIP  HI 

 
Description- 

The Host IP Address of the unit designates the server of the group.  

When the unit is set to mirror, this address tells the unit where to look for new files.  
HOSTIPADDRESS(s) adhere to standards.  See IPADDRESS command. 
 

Form- 

HOSTIPADDRESS/HIP/HI [ADDRESS NUM][SETTING] 

 
Arguments- 
 

ADDRESS NUMBER 

NUM 

DESCRIPTION 

First Host 

0 

Numerical designation of the first Host. 

Second Host 

1 

Numerical designation of the second Host. 

Third Host 

2 

Numerical designation of the third Host. 

Fourth Host 

3 

Numerical designation of the fourth Host. 

 

SETTING 
TEXT 

NUM 

DESCRIPTION 

None 

0.0.0.0, 0.0.0.0, 0.0.0.0, 0.0.0.0 

Host Address in decimal form.  The 
unit can support up to 4 host(s) at one 
time.  Default Setting. 

 
Errors- 
 

ERROR TEXT 

NUM 

DESCRIPTION 

ERROR- BAD ARGUMENTS 

2 

The argument(s) is/are missing or invalid 

ERROR- FEATURE LOCKED 

253 

The Networking feature of the unit is 
disabled. 

 
Examples- 
 

Operation

-

 

Display the current HOSTIPADDRESS. 

<NAME> HOSTIPADDRESS 

OK 
HOSTIPADDRESSES= 0.0.0.0, 0.0.0.0, 0.0.0.0, 0.0.0.0 
<Empty Line>

 

 

Operation

-

 

Set the first HOSTIPADDRESS. 

<NAME> HOSTIPADDRESS 0 149.149.49.194 

OK 
<Empty Line>

 

 
Products Supported-  

Soloist 2 and Duet 

 

See Also-

  IPADDRESS, IPMASK, and GATEIPADDRESS

 

 

 

 

Summary of Contents for Soloist 2








































































































































































































Reviews:

No comments